New One Zwave Plug, 800 Series Zwave Outlet, Bult in Zwave Repeater, Z-Wave Smart Plug, Z-Wave Hub Required, Compatible with Hubitat, SmartThings, Vera, Wink, Fibaro, Homeseer, 2GIG, Alarm
$26.99
Related Products
Product description
New One Z-Wave Smart Plug 800 Series 
New One Z-Wave Smart Plug uses the latest 800 series chip. This makes the zwave plug more compatible and has a wider connection range.
APP Control
After adding the zwave smart plug in the APP, the plug can be remotely controlled by the phone
Z-Wave Plus LR
800s Zwave plug extend data transmission range. Plug can transmit up to 1300 Ft in open areas
Alexa Control
If the Hub supports voice control, you can control the plug by connecting Alexa
Schedule Function
Set the time for the plug to be turned on and off in phone to save time and effort
1 APP Control
2 Long Range
3 Voice Control
4 Schedule Timer
Quick Connect
If your Hub supports Smart Start, just use it quickly by scanning the QR code
Z-Wave Safe
Z-Wave Outlet with S2 Security effectively prevents hacker access and eavesdropping
Relay Signal
Plug can act as a repeater to transmit signals. However, it can only relay up to 4 layers of signals
Size Comparison
The tiny and precise size design allows wall outlet to accommodate two plugs, Improved efficiency
1 Smart Start
2 S2 Security
3 Z-Wave Repeater
4 Mini Size
Add Device
Open the Z-Wave hub app and click add device
Scan QR Code
Click and scan the QR code of the plug
Press Button
Press the button 3 times quickly
Connecting
Different hubs recognize the plug at different speeds, please wait patiently for 1-3 minutes
Connecting Success
The plug has been successfully added to the App and can be controlled using the App
How to add a Z-Wave smart plug in the APP
1 Add Device 2 Scan QR Code 3 Press Button 4 Connecting 5 Connecting Success
The New One Z-Wave plug is basically compatible with many Hubs. Note: It will take 1-3 minutes for the plug to connect to the Hub, please be patient.
Do I need a hub?
Z-Wave Outlet is compatible with SmartThings, Vera, Wink, Fibaro, Homeseer, 2GIG, Hubitat and other hubs.
Note: Can not connect with ECHO PLUS, Vivint Hub and Alarm.com Hub!
How to reset the smart plug?
Press the button twice quickly holding it 10 secs on a 3rd press.
What to do if the Z Wave Outlet fails to connect?
It is recommended that you read the product manual patiently.
[Long Range] 800 Series Zwave Outlet extend data transmission range. Add LR via SmartStart in an 800 Series Hub. Z wave Outlet can transmit up to 1300 Ft in open areas
[S2 Security] S2 Zwave plugs have a unique matching QR code (DSK). Zwave devices use strong data encryption to ensure security between devices. And there are mechanisms to intercept attackers and replay messages
[Compatibility] Zwave smart plug needs to work with a hub! The Zwave plug is compatible with SmartThings, Vera, Wink, Fibaro, Homeseer, 2GIG, Hubitat and other hubs. Note: Can not connect with ECHO PLUS, Vivint Hub
[Z-Wave Repeater] All New One Z-Wave plugs can act as Z-Wave repeaters to transmit signals when working. Note: When the Zwave Smart Outlet acts as a repeater, it can only relay up to 4 layers of signals
[Intelligent Life] Z-Wave outlet as a smart outlet is fully capable of doing the job of other smart plugs. Remote voice control through the app, set timers and schedules, etc. For example, Alexa, turn on the coffee machine to brew coffee
[Mini Design] The compact design of Z wave Plug means that smart plugs can be used in a same outlet. MAX 1875W
10 reviews for New One Zwave Plug, 800 Series Zwave Outlet, Bult in Zwave Repeater, Z-Wave Smart Plug, Z-Wave Hub Required, Compatible with Hubitat, SmartThings, Vera, Wink, Fibaro, Homeseer, 2GIG, Alarm
Add a review
$26.99
Kelly Hennessy –
Long-distance range and reliable
I use this to control my outdoor landscape lights on an automatic timer. The plug is far away in my garage through multiple walls, and it still works like a charm with nearly zero standby power draw. I highly recommend Z-Wave plugs over WiFi plugs.
K-Loy –
Works perfect with home assistant
Add this to my home assistant without problem. It is fun flawless since the day of installation and it’s on the complete opposite end of my house from my server Zwave antenna. I use mostly Zooz devices but I am satisfied with this.
Ryan Pomaski –
They work….ish?
Of course, got them in a two pack.. one was Included with zero fuss, the second one was being cranky. I had to exclude and delete it out of Homeseer a few times before it started to behave. I’ve also noticed that they’re seemingly a little slow to respond to commands, I’ll sometimes have to issue the command twice before it starts. I don’t know if that’s a failure, or just lag as of yet though… they’re also much smaller than it appears in the photo. One thing to note is that if you have a power strip with the outlets rotated to support wall warts, it’s entirely possible that these will block 2-3 outlets. A tiny extension cord (Like B000233WJ6) would solve that, albeit in a kinda unsightly manner.
Kangua –
Easiest to install to SmartThings
This dimmer plug is the easiest to install to SmartThings by simply using the QR code. The installation was done in seconds! This is an exemplary SmartThings product that any 3rd party device maker should learn from.The dimming function works exactly as described when a COB LED strip is attached. 5 stars for sure!
DaleC –
Hubitat hub compatible. . . oh Yeah!
Works out of the box with HUBITAT hub. The system automatically associates the device with the built-in Minoston Mini Plug Dimmer device driver which works perfectly with the device. The plug has a unique way to initiate the paring by quickly pressing the button 3 times. I have no idea why some reviewers complained about the device connection being hard to do because it is totally straight forward like all zwave devices to include with the exception the trigger to initate is 3 quick presses.
Robert Ski –
Small issues
EVERY smart home devices has issues pairing but with a bit of google research you can figure it out only major players keep there forums up to date. PAIRING is the biggest issue I’ve faced with more than 50 smart home devices with zigbee to zwave but eventually if its certified it will work. Biggest issue is pairing.
BRIAN LITELL –
Very good for low current applications.
Setup to Smartthings went well. I tried to control 2 separate portable air conditioners. The Whynter AC draws 1200 watts and the Black & Decker draws 1100 watts. First I tried the Whynter AC but as soon as the compressor turns on the plug turns off & starts flashing red. Then I tried the Black & Decker but as soon as the compressor turns on the plug turns off & starts flashing red. Neither air conditioner draws more than 11 amps. Maybe it could work on a very very small air conditioner less than 7 amps.
Family of four –
Works remotely and as a scheduled timer
This works great with my house system. What makes this much better than traditional timers is the ability to operate from my phone and alarm.com
Client d’Amazon –
Domotique, fonctionne très bien avec Jeedom en zwave
Luis C. –
Lo instalé en la habitación de mi hijo para controlar el brillo de su lámpara de mesa. Este es de los pocos dimmers donde la lámpara trabaja bien en el rango completo de intensidades.Lo agregué a mi red Z-Wave controlada por Home Assistant, una vez que ingresé el PIN, lo detectó inmeditamente y fué posible configurar parámetros adicionales muy fácilmente.Se puede controlar desde la app o localmente:- 1 click: enciende/apaga la carga- 2 clicks: activa el brillo máximo (programable)- mantener presionado: sube / baja gradualmente el brillo